Adding Technical Support Documents for Passive Fire

Adding Technical Support Documents for Passive Fire

Any images displayed are representative only and may differ depending on the version being used.

The steps are the same as loading Drawing Sets into the hub (found in the Loading Drawing Sets guide). It is recommended to load Data Sheets that are specific to a project. You may have a number of Drawing Sets based on the number of different ‘Manufacturers products’ you use. i.e.


When loading Data sheets into the hub:


Drawing Name: is the name of the solution ie. 3M Mouldable Putty Concrete Floor Blank Seal; SL Collar to HVAC bundle 16mm FR plasterboard ceiling (V17.9)



Version Name: is the test report reference i.e. RIR FCO-3200; FRT 190272 / 21SFR00057.

These fields will automatically come into the individual install record, summary reports and linked excel spreadsheet. 


You can also add the Data Sheets details into the lists. The fields are as follows:

Solution Test Report Reference: is the test report reference i.e. RIR FCO-3200; FRT 190272 / 21SFR00057


Solution Description: is the name of the solution i.e. 3M Mouldable Putty Concrete Floor Blank Seal; SL Collar to HVAC bundle 16mm FR plasterboard ceiling (V17.9)


You can filter down to choose specific Drawings to appear in a Work Package.  This information is found in Managing Drawing on a Work Package.


To access and use drawing sets in the app, check out this guide.

Credits

Technical Support Documents shown are courtesy of Ryanfire


    • Related Articles

    • Using the Technical Support Tab on Work Packages

      Any images displayed are representative only and may differ depending on the version being used. The Technical Support Tab on a Work Package shows all of the Technical Support drawing sets and drawings that have been loaded for a Work Package. This ...

    • Loading Drawing Sets

      Any images displayed are representative only and may differ depending on the version being used. Drawings sets serve three purposes: To provide the field staff with a consistent set of site plans / images that they can re-use To consolidate all ...

    • Set up a Work Package for your Project

      Any images displayed are representative only and may differ depending on the version being used. Checklist Here are the things you need to check before you set up a new Work Package to hold the work for your site: Staff Are the staff you want to use ...

    • Adding a New Version of a Drawing

      Any images displayed are representative only and may differ depending on the version being used. Selecting a Drawing for Editing Click on the Edit Version button or the Drawing Name. You will see all the versions of that drawing that have been ...

    • Adding Member Details

      Any images displayed are representative only and may differ depending on the version being used. In Clarinspect you can add the following member details into your reports: Qualification Certificate Job title Phone number Signature Enter the relevant ...