Copying Inspections in the App

Any images displayed are representative only and may differ depending on the version being used.

Within Clarinspect you can copy inspections from within your app. When you copy an inspection, all of the data transfers across, except any photos.

The sequence for the inspection or observation reference will automatically go to the next available number.

Floor plans will be retained but not pins.

You can either copy a completed inspection, or an active inspection. 

To copy an active or finished inspection on Android:

From the ‘My Work’ menu

Choose the inspection you’d like to copy from either the ‘Active’, ‘To Send’ or ‘Sent to Hub’ tabs. 

Go into the inspection and tap the 3 dot menu at the top right corner

Press ‘Copy’

The options you see in the 3 dot menu will vary depending on which work queue you are in.

To copy an active inspection on iOS:

Go to your ‘Active’ queue

Tap the 3 dot menu to the side of the inspection you’d like to copy

Press ’Copy’

To copy a completed inspection on iOS:

Go to your ‘Finished’ queue

Tap the 3 dot menu to the side of the inspection you’d like to copy

Press ’Copy’

Completed work will be sent back to the hub but will also remain available for copying from the ‘Finished’ menu for 7 days.

• Related Articles

• Know your Statuses - App

  The Clarinspect App uses a number of different coloured icons to instantly show you the status information within Work Packages. This guide will describe what they all mean so you can understand the status of each inspection at a glance. Android App: ...

• Using GPS in the App

  Any images displayed are representative only and may differ depending on the version being used. In Clarinspect you can record GPS location within your inspections. If you would like this field in your app and you don’t already have it, please ...

• Using Drawing Sets in the App

  Any images displayed are representative only and may differ depending on the version being used. If you have loaded a Drawing Set on a work package, then Site Plans view will be available on the app. To load Drawing Sets, check out our guides Loading ...

• Pinning to site plans on the app

  In Clarinspect when you are using the app out on site you can pin items directly onto a site plan. Pinning items to a plan makes locations clear and accurate, helping inspectors, contractors, and clients quickly understand where each item is on site. ...

• Using SmartFills on the App

  Overview SmartFills are a way of pre-setting a set of fields on the inspection / installation record. Initially there may only be a few types of SmartFill available, and as you need different ranges of fields we can add further types. SmartFills are ...